przemoc Report Share Posted August 31, 2014 Hello! Recenly on my Windows XP Pro x64 SP2 I upgraded to recent version, i.e. 4.5.4.5000. Unfortunately I don't remember which version I had before, but it was never failing like it is doing now. One day I tried to record BD (first use of upgraded CDBXP), but I went for x8 instead of x6 that is supported by BD disc I use. Recording ended with error, but I thought it was related to overspeed burning. So I retried with x6, and it ended same way. Today I retried and got the same error (3rd use of upgraded CDBXP). Later I burnt something taking less space and burning went fine, but verification failed at one file. Finally I did 5th recording since upgrade, this time having logging enabled and I got the error again. Each time error happens it is close to the end of burning: somewhere at 9x% tray is ejected and message is shown after a few seconds. (Fifth burning gave error at 91%.) This time the timing was following: 16:58:40 Burn process started at 6x (26 970 KB/s) 17:16:15 Error occurred: Exception from HRESULT: 0x80040275 Just for the record: - I use Lite-On iHBS212, firmware HL04 - DVD Identifier shows following info about Platinum discs I use: ---------------------------------------------------------------------------- Unique Disc Identifier : [BD-R-SL:RITEK-BR3-000] ---------------------------------------------------------------------------- Disc Type : [BD-R SL : Class 0 - Version 1] Manufacturer Name : [Ritek Corp.] Manufacturer ID : [RITEK] Media Type ID : [BR3] Product Revision : [000] Stamper Date : [Not Present On Disc] Layer Info : [1 Layer (L0) : 25.03 GB (23.31 GiB) Per Layer] Blank Disc Capacity : [12,219,392 Sectors = 25.03 GB (23.31 GiB)] Recording Speeds : [1x , 2x , 4x , 6x] ---------------------------------------------------------------------------- [ DVD Identifier V5.2.0 - http://DVD.Identifier.CDfreaks.com ] ---------------------------------------------------------------------------- XZ compressed log is big (15 MB), so I uploaded it to MF: https://www.mediafire.com/?ab889e729n0ybbl Maybe I'll downgrade CDBXP after all and retry previously failing stuff with it. Quote Link to comment Share on other sites More sharing options...
floele Report Share Posted September 4, 2014 Thanks, I forwarded this information to StarBurn, not sure what this error is supposed to mean. Quote Link to comment Share on other sites More sharing options...
floele Report Share Posted September 8, 2014 According to StarBurn this should be a drive / media incompatibility. Could you please check which older version of CDBurnerXP exactly (http://download.cdburnerxp.se/) works fine so that we can double check whether or not that is a software issue? Quote Link to comment Share on other sites More sharing options...
freaxx Report Share Posted October 29, 2014 I got exactly the same error HRESULT: 0x80040275 I got it very often in the last times (with BD-DL 50GB) almost 50% of all my burning tries failes with this error regarding the last month (no matter what burning speed I try (2x/4x/6x/8x)) I think it happens when the first layer is finished and the second layer starts to burn (?) I use: - Windows7 64bit - CD burner XP 4.5.4.5067 - Pioneer BDR-207DBK (FW version 1.35) - Mediarange MR509 (with manufacturer-ID "CMCMAGDI6") (--> http://www.mediarange.de/en/products/product_search/index.pmode/modul,detail,818/index.pmode?pst=MR509 ) what does this error exactly mean ? Quote Link to comment Share on other sites More sharing options...
floele Report Share Posted November 2, 2014 Could be anything unfortunately, I'd try a firmware update for the drive if possible. Quote Link to comment Share on other sites More sharing options...
jcjm55 Report Share Posted February 22, 2015 Hello, I got exactly the same error my system windows 7 x64 my versión cdburner 4.5.4.5306 ** INFO : Drive = MATSHITA BD-MLT UJ230AS - [FW 1.00] - [uSB] ** INFO : Write Capabilities = BD-R BD-RE ** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW ** INFO : Write Capabilities = DVD-R DVD-R-DL DVD-RW DVD-RAM ** INFO : Disc = [bD-R-SL:CMCMAG-BA5-000] ** INFO : Reference Speed : 1x BD = 4496 kBps = 3.25x DVD ** INFO : An Writeable Disc Is Recommended For Accurate Results ** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below ** INFO : GET PERFORMANCE Write Speed Descriptor(s) Descriptor #1 = 17983 kBps ( 4.00x) - [CLV/Non-Pure CAV] Descriptor #2 = 8991 kBps ( 2.00x) - [CLV/Non-Pure CAV] Descriptor #3 = 4496 kBps ( 1.00x) - [CLV/Non-Pure CAV] ** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command] ** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported Descriptor #1 = 17983 kBps ( 4.00x) - [CLV/Non-Pure CAV] Descriptor #2 = 8991 kBps ( 2.00x) - [CLV/Non-Pure CAV] Descriptor #3 = 4496 kBps ( 1.00x) - [CLV/Non-Pure CAV] ---------------------------------------------------------------------------- Unique Disc Identifier : [bD-R-SL:CMCMAG-BA5-000] ---------------------------------------------------------------------------- Disc Type : [bD-R SL : Class 0 - Version 1] Manufacturer Name : [CMC Magnetics Corp.] Manufacturer ID : [CMCMAG] Media Type ID : [bA5] Product Revision : [000] Stamper Date : [Not Present On Disc] Layer Info : [1 Layer (L0) : 25.03 GB (23.31 GiB) Per Layer] Blank Disc Capacity : [12,219,392 Sectors = 25.03 GB (23.31 GiB)] Recording Speeds : [1x , 2x , 4x , 6x] ---------------------------------------------------------------------------- [ DVD Identifier V5.2.0 - http://DVD.Identifier.CDfreaks.com ] ---------------------------------------------------------------------------- the only way was to burn the BR 1x but after losing 6 with previous versions worked well at 2x but I do not remember which had long since burned br sorry my english no is good Quote Link to comment Share on other sites More sharing options...
tizzo Report Share Posted April 19, 2015 FYI, I've seen this same error when creating ISO images, when no burner activity was involved at all. So the error itself is more general than that. In my particular case I was using a piece of third-party software functioning as a virtual network file system (specifically the Drive application for my PogoPlug network storage device). When I used a standard Windows network drive mount to a Samba share, the problem went away. Quote Link to comment Share on other sites More sharing options...
floele Report Share Posted April 19, 2015 If you have the issue without device activity, please also provide a log file, that should be something which StarBurn can fix. Also you can try the current preview release with an updated burning library if you still have issues: http://daily.cdburnerxp.se/4.5/cdbxp_setup_4.5.5.5560.exe Quote Link to comment Share on other sites More sharing options...
cwrb Report Share Posted January 28, 2016 Any resolution?I get the same error code when trying to burn to a 4x BD-R on Win10 with my newly purchased i/oMagic burner. There are no firmware or drive update for this burner and I am using the current version of CDburnerXP.I will try the blu-ray burner on my Win7 and also try a DVD burn. Quote Link to comment Share on other sites More sharing options...
Danny Carnage Report Share Posted July 2, 2016 I have the exact same problem so seems better to post here rather than start a duplicate thread. I get the error message at exacly 51% when trying to burn dual-layer DVD discs. (CDBurnerXP-x64-4.5.4.5306 / Windows 7 64 Bit) 14:11:24 Burn process started at 6x (8,310 KB/s) 14:14:15 Error occurred: Exception from HRESULT: 0x80040275 14:15:36 Burn process started at 6x (8,310 KB/s) 14:29:59 Error occurred: Exception from HRESULT: 0x80040275 14:30:56 Burn process started at 6x (8,310 KB/s) I'm at a loss at what could be the issue. Quote Link to comment Share on other sites More sharing options...
cwrb Report Share Posted July 2, 2016 The problem is the disk quality. I bought the next level up and works fine. The burner Manufacturer (i/o magic) indicated the disks (ridata gold bd-r 4x 25gb) work with their drive (6x slim portable bluray rewritable) but they don't. The store and manufactures wouldn't accept responsibility and provide a refund. The new disks (ridata valor bd-r 10x 25g) work every time. The lesson cost me $40. Don't buy blu-ray disks unless the store quarantees they will work. Quote Link to comment Share on other sites More sharing options...
R A V E N Report Share Posted October 28, 2016 I've got the same error under different circumstances. After I changed file system to UDF, error dissappeared. Quote Link to comment Share on other sites More sharing options...
crocdoc Report Share Posted June 12, 2017 I am getting the identical error message. I have burned dozens of BluRays without a problem, now I am getting errors on every single one in the first minute. This is from the same batch of discs I have used before, without issue. Quote Link to comment Share on other sites More sharing options...
Jarry Report Share Posted May 31, 2018 As so many of you, I'm also getting this error. CDburnerXP worked without any problem for some time, now I can not burn single CD/DVD. Some say this error is media- or burner-related, but I doubt. I tried different media, lower burning speed, even different dvd-burner, rebooted before burning, but nothing helped. I was stuck with that error and could not burn single cd/dvd! Finally I solved this problem by using other free burning software. Surprisingly, it works with the very same media/burner that cdburnerxp refused. So it seems to me, this error has something to do with cdburnerxp-software... Quote Link to comment Share on other sites More sharing options...
Corrado Report Share Posted October 16, 2018 Same for me. I am using the latest versione of cd burner xp. I don't think it's a problem related to the disc. It's a verbatim so it should be a good quality... Quote Link to comment Share on other sites More sharing options...
Senmis Report Share Posted November 20, 2018 Every time I'm going to burn a DVD, if I do not uninstall and reinstall the program, this error appears. Quote Link to comment Share on other sites More sharing options...
cwrb Report Share Posted November 20, 2018 I only use this app for burning ISOs and bootable disks. Win10 allows me to write everything else to dvd and BluRay. Just drag and drop. I can't recall how I fixed the problem but it may have had to do with ensuring the app was completely deleted before reinstalling. Apps like iobit uninstaller (free) clean out every bit of the app. Quote Link to comment Share on other sites More sharing options...
Corrado Report Share Posted November 29, 2018 On 11/20/2018 at 2:23 PM, Senmis said: Every time I'm going to burn a DVD, if I do not uninstall and reinstall the program, this error appears. You mean every time you burn a DVD you have to uninstall and reinstall cd burner??? Quote Link to comment Share on other sites More sharing options...
Corrado Report Share Posted November 29, 2018 On 11/20/2018 at 5:59 PM, cwrb said: I only use this app for burning ISOs and bootable disks. Win10 allows me to write everything else to dvd and BluRay. Just drag and drop. I can't recall how I fixed the problem but it may have had to do with ensuring the app was completely deleted before reinstalling. Apps like iobit uninstaller (free) clean out every bit of the app. Yes but you don't have the overburning option Quote Link to comment Share on other sites More sharing options...
cwrb Report Share Posted November 29, 2018 Tried overburning a few years ago and had problems and stopped using it. Maybe using the app without overburning might work. Have you tried? Quote Link to comment Share on other sites More sharing options...
Corrado Report Share Posted December 2, 2018 On 11/29/2018 at 3:46 PM, cwrb said: Tried overburning a few years ago and had problems and stopped using it. Maybe using the app without overburning might work. Have you tried? I tried with or without overburning. Always the same way... Quote Link to comment Share on other sites More sharing options...
Murmea Huo Report Share Posted December 21, 2020 Hi, I received the same error when trying to save a compilation of DVD data to an ISO file. In my case, the problem was caused by an illegal "-" (dash) character in the disk name. When I tried find a solution, I realized that I had to remove the hyphen from the name and the error was gone. Maybe it can help someone. Jiri Quote Link to comment Share on other sites More sharing options...
explorerdotexe Report Share Posted February 6, 2021 I also got this error trying to make a bootable ISO file with a 600mb hard disk image, but i didn't wanna make another thread. So clealry this issue extends beyond physical cd's and burners. Quote Link to comment Share on other sites More sharing options...
capca99 Report Share Posted August 23 more then one Year later the same problem as nearly everybody in this thread. Want to create an ISO File and i can try what i want everytime: HRESULT: 0x80040275 is there a solution anywhere? regards Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.